Vehicle Mounted Dash Cam for BYD

BYD dash cam (OEM EL3776900) compatible with Seal, Atto 3, Dolphins, Sealion 6/Seal U. Includes free 64GB SanDisk SD card and upgraded pry tools. Direct OEM replacement for BYD electric vehicles.

Product Highlights:
✅ Multi-Model Compatibility
Compatible with popular BYD models including:

• ATTO 3, Dolphin, Seal
• Tang EV, Song Pro DM-i/DM
• Song PLUS DM-i/EV, Song MAX DM-i
• Han DM/EV/DM-i, Qin PLUS EV/DM-i
• Han EV Champion Edition, Tang DM-i Champion Edition

✅ Plug-and-Play Design
Directly connects to your vehicle's rearview mirror interface (blue port models supported). No complex wiring required.

✅ Reliable Recording
1080p HD loop recording with wide dynamic range (WDR)* ensures clear footage day and night.

Important Notes:
⚠️ Factory Variations
BYD vehicles may have minor hardware differences between production batches. We randomly ship compatible versions from certified suppliers to match your model year.

🔧 Installation Guide:

1. Remove existing rubber stopper from the rearview mirror compartment before installation.
2. Reboot system after setup by holding the mute button (between front seats) for 10 seconds.
   Turning the car on/off alone may not activate the camera.

Note: Video quality may vary by lighting conditions. This is an aftermarket accessory not manufactured by BYD.

1. Check whether there is a reserved installation position.
2. pay attention to whether there is a spare data cable at the red arrow on the car, if there is no need to buy this wire harness.
3. Connect the data cable to the camera and the blue port on the lower part of the host, and cannot be plugged into the white port. (There are some differences in the position of the blue interface of models produced in different years, please pay attention to the installation).
4. 4.After the installation is complete, press and hold the volume button for 10 seconds to restart the vehicle system and identify it.